Minor slopes and unevenness can be compensated with the Floorify Comfort underlay combined with the Floorify floors. Extreme roughness and unevenness in the subfloor can cause unevenness in the floor surface and thus accelerate wear in the floor or click system.
Points for attention:
There should be more than 5 mm in height difference over 2 linear metres. (3 mm for herringbone)
There should be no joints/grooves more than 5 mm in width and/or 4 mm in depth.
- The surface must be stable.
Is the evenness greater than this? In that case, you can flatten the subfloor with a levelling compound or use another type of subfloor with greater levelling capacity. Ask your dealer or installer for advice.